The GoodFET30 is the fifth hardware revision of the GoodFET. It aims to reduce BOM cost and board surface area while at the same time increasing performance. All crystals have been removed in favor of internally-calibrated oscillators, and external pull-up resistors have been dropped in favor of internal pulling resistors.
Eagle CAD 5.x files for the design can be found in /branches/goodfet30 of the subversion repository, or as goodfet30.zip.
Bill of Materials
|2||0603||0.1μF Decoupling Capacitors|
|2||0603||330R LED Series Resistors|
|1||0603||47K !RST Pull-up Resistor|
|1||8 pin header (optional)|
|1||2x7 pin header|
Email travis at radiantmachines.com if you should find any.